Shure SLXD14/SM35 (562-606 MHz)

Digital Wireless Receiver
- Transparent 24-bit digital audio
- Extended 20 Hz to 20 kHz frequency range (microphone dependent)
- 120 dB dynamic range
- Digital predictive switching diversity
- 44 MHz tuning bandwidth (region dependent)
- 32 available channels per frequency band (region dependent)
- Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band
- Easy pairing of transmitters and receivers over IR scan and sync
- Up to 8 hours from 2 AA batteries or optional Shure SB903 rechargeable battery
- Interchangeable microphone capsules
- Rugged metal construction

Bodypack Transmitter
- Transparent 24-bit digital audio
- Extended 20 Hz to 20 kHz frequency range (microphone dependent)
- 120 dB dynamic range
- Digital predictive switching diversity
- Operating range of 100 m (300 ft.)
- 44 MHz tuning bandwidth (region dependent)
- 32 available channels per frequency band (region dependent)
- Up to 10 compatible systems per 6MHz TV band; 12 systems per 8 MHz band
- Easy pairing of transmitters and receivers over IR scan and sync
- Up to 8 hours from 2 AA batteries. Upgrade to the optional Shure SB903 Lithium-ion rechargeable battery to monitor battery charge status in hours and minutes, as well as battery life and health statistics.
- Choice of instrument cable or lavalier, headworn and instrument microphones
- Ergonomic and durable plastic construction
- Performance headset condenser microphone
- Wireframe headset fits securely and comfortably for active performers and multi-instrumentalists
- Tight, unidirectional cardioid polar pattern rejects signal bleed and feedback for use on loud stages and behind floor monitors
- Flexible gooseneck design allows for optimized placement that further improves source isolation
- Lightweight and low-profile form enables comfortable, long-wearing use
- TA4F (TQG) connector is compatible with any Shure wireless bodypack
- Locking snap-fit windscreens tame plosives, breath, and wind noise for clean and intelligible sound
- Tailored frequency response refined for clear, crisp vocal reproduction
- Included in BLX and GLX-D® wireless systems, renowned for their ease of use and reliable performance
- Legendary Shure precision engineering for durability and performance

- Weight: 2.210kg

SLXD4 Specifications
Weight: 816 g
Height x Width x Depth: 42.0 × 197.0 × 152.0 mm
Transmission: Digital in UHF TV band
Type of Power Supply: External
Receiver Housings: Metal
Bias via BNC: No
High Density Mode: No
Interference Detection: No
Remote Control: No
Number of compatible systems per frequency band: 32
DANTE-Enabled Products: No
Detachable Antennas: No
Logic: No
Cascade: No
Line Mic Switch: No
Phantom Power Protection: No

SLXD1 Specifications
Weight: 89 g
Height x Width x Depth: 98.0 × 68.0 × 25.5 mm
Transmitter weight: 89 g
Battery life lithium: 8 h
Battery life alkaline: 8 h
Form Factor: Bodypack
Audio Mute: No
Detachable Antennas: No
Switchable RF power: No
Batteries: AA, Shure Lithium-Ion battery
Connectors: TQG
Frequency Diversity: No
Functionality: Transmitter
High Density Mode: No
Included antenna: 1/4 wave
Input impedance: 1000 kΩ
Transmission: Digital in UHF TV band

SM35 Specifications
Weight: 72 g
Frequency Response: 50 Hz – 20 kHz
Frequency Response: Tailored
Sensitivity: -59.00 dBV/Pa – 1.10 mV/Pa
Equivalent Selfnoise: 39 dB(A)
Sound Pressure: 153.0 dB
Transducer Type: Condenser
Polar Pattern: Cardioid
Switchable low cut: No
Connectors: 3 Pin XLR, TQG (T4AF, 4-Pin Mini)
Attenuator: No
Interchangeable Capsule: No
Main Functionality: Performance
Headphone Output: No
Requires Phantom Power: TQG: 5v DC (bias), XLR: 11 to 52 VDC VDC
Cartridge: Fixed