DPA 4006C
Condenser Microphone
EUR 2212.40
MSRP: EUR 2283.60
MSRP: EUR 2283.60
Incl. VAT, free shipping in Germany
Product # | 158579 |
Brand | DPA |
Category | Condenser Microphones | Brand Category | DPA - Condenser Mics |
Series | DPA d:dicate |
Release date | January 2013 |
Availability | Will be ordered for you as quick as possible |
This page contains auto-translated text
Description
The Type 4006 is without doubt the most popular standard microphone in the Series 4000 microphones and has earned a status as being the worldwide studio standard since its release in 1982. It is an omnidirectional condenser microphone with an extremely linear frequency response from 20 Hz to 20 kHz, high sensitivity and a low noise floor. The 4006 is phantom powered (P48), which together with the extended range of acoustic pressure equalizers and different protection grids turns the 4006 into an extremely cost effective solution. All in all the Type 4006 can be changed into 7 different microphone versions acoustically. The 4006 has gained its reputation through its total transparency in both the near-field and in the diffuse field. A must for any studio. Wherever a small, lightweight, inconspicuous microphone for top-quality recording is required, the compact design and clean, transparent sound of our versatile 4006C makes it the perfect choice. They are particularly popular as AB stereo pairs in concert halls where quality recordings can sometimes be compromised by classic architecture. The 4006C can be mounted, hung or concealed to create clean, transparent recordings. It is ideal in theaters, opera and concert halls or places of worship where there is a live audience, and for film applications, both in the studio and on location. These mics are also popular with musicians for close-miking instruments such as double bass, trumpet and piano. At the same time they are wonderful for ambience miking on soundstages, in sports stadiums and other environments where audience sound needs to be recorded. The 4006 can be upgraded to a transformerless version, 4006-TL. The upgrade includes a factory-based retrofitting to the DPA 4006-TL with transformerless preamplifier, close-miking grid, DPA 4006-TL type ring, calibration chart and new mic case.
Attributes
Product Details
|
Properties
Principle of operation:
Pressure
Cartridge type:
Pre-polarized condenser
Power supply:
48V Phantom power
Frequency range, ± 2dB:
20Hz - 20kHz
Directional characteristics:
Omnidirectional
Equivalent noise level A-weighted:
Type. 15 dB(A) right. 20 µPa
Sensitivity, nominal, ±2 dB:
10mV/Pa; -40 dB right. 1V/Pa
Equiv. noise level ITU-R BS.468-4:
Type. 27 dB (max. 29 dB)
Capsule diameter:
16mm (0.63in)
Total harmonic distortion (THD):
<0.5% up to 129 dB SPL peak
<1% up to 135 dB SPL peak preamplifier frequency range:
20Hz to 40kHz ±1dB
Output impedance:
<75 ohms
Cable drive capability:
Up to 300 m (984 ft)
Microphone length:
165mm (6.5in)
Max. SPL, peak before clipping:
143 dB SPL peak (f> 200 Hz)
Weight:
150g (5.29oz)
Dynamic Range:
Type. 120dB
S/N ratio, right. 1 kHz at 1 Pa (94 dB SPL):
79dB
Connector:
3-pin XLR-M (standard P48)
Current consumption:
3.40mA
Pressure
Cartridge type:
Pre-polarized condenser
Power supply:
48V Phantom power
Frequency range, ± 2dB:
20Hz - 20kHz
Directional characteristics:
Omnidirectional
Equivalent noise level A-weighted:
Type. 15 dB(A) right. 20 µPa
Sensitivity, nominal, ±2 dB:
10mV/Pa; -40 dB right. 1V/Pa
Equiv. noise level ITU-R BS.468-4:
Type. 27 dB (max. 29 dB)
Capsule diameter:
16mm (0.63in)
Total harmonic distortion (THD):
<0.5% up to 129 dB SPL peak
<1% up to 135 dB SPL peak preamplifier frequency range:
20Hz to 40kHz ±1dB
Output impedance:
<75 ohms
Cable drive capability:
Up to 300 m (984 ft)
Microphone length:
165mm (6.5in)
Max. SPL, peak before clipping:
143 dB SPL peak (f> 200 Hz)
Weight:
150g (5.29oz)
Dynamic Range:
Type. 120dB
S/N ratio, right. 1 kHz at 1 Pa (94 dB SPL):
79dB
Connector:
3-pin XLR-M (standard P48)
Current consumption:
3.40mA
Brand
Report incorrect data about this product