Free The Tone MB-5 / Midi Thru Box

There is usually no problem if you have only one MIDI receiving device in your system. However if your system has multiple MIDI devic-es and if all of the MIDI signal wirings are done serially, MIDI data transmission requires a certain amount of time which can result in a
delay or a malfunction.

The MB-5 receives one stream of MIDI data and splits it into five to enable parallel data transmission. By receiving MIDI data directly
from the MB-5, your devices can avoid various problems that can occur if it is serially connected.

The wave shape of the MIDI signal fed into the MB-5 is corrected by its internal logic circuit, preventing transmission errors due to
deteriorated data wave shape.

- By connecting MIDI data in parallel via the MB-5, you can avoid data delay or malfunction that may occur when multiple MIDI devices are
serially connected.

- The incoming MIDI signal s waveform is reshaped by going through the logic circuit in the MB-5, preventing transmission error due to
deteriorated data wave shape.