Schaller S-Locks Set (black chrome / M)

The Schaller S-Locks come in a attractive re-usable crystal box that you can use as a storage container after removing the protective foam.

Screw the strap buttons with attached felt washer into the existing holes by hand with a 3mm/1/8" Allen key. Please make sure that the strap buttons sit fully on the wood, if necessary, first rub the wood flat.

If there is still no drill hole, drill this depending on the wood used.

Insert the lock through the hole in the strap. The lock is on the inside of your belt and the threaded hole for the lock-wheel on the outside. The open side of the lock (U-shape) points in each direction to the belt, so that the instrument can later safely hang in the lock.

If the hole in the belt is too narrow or there is only one slot in the belt, please cut away a piece of the belt in a circle (10mm) so that the thread can be easily pushed through the lock without the leather parts standing upright. Otherwise, the lock wheel can not be securely fastened and the lock and lock wheel can disengage.