spl Transpressor Modell 1080
Compressor/Limiter
EUR 1300.75
Incl. VAT, free shipping in Germany
Product # | 158112 |
Brand | spl |
Category | Compressors & Limiters | Brand Category | spl - Compressors & Limiters |
Release date | December 2012 |
Availability | Will be ordered for you as quick as possible |
This page contains auto-translated text
Description
Transient Designer The first impulse of the attack is called a transient. The Transient Designer allows you to design the following signal curve. For this purpose, the attack and decay process is strengthened or weakened with just two controls. Primary applications include sound shaping of percussive instruments, emphasizing or reducing transients on string instruments or consonants on voices, etc. Twin Core Compressor The compressor is based on our proven twin core circuit, which has very low distortion data. With threshold, ratio, attack, release and make-up, all classic control parameters are available. A switchable automatic control for attack and release aligns the control with the input signal like a cruise control. For targeted compression of specific frequency or instrument ranges, two low passes in the bass range and a band pass in the mid range can be selected. External signals can control the compressor via the side chain input. A dry/wet control determines the balance between input and effect signals. Transpressor The Transpressor has a single-channel structure; two devices can be linked for stereo processing. The interaction of transient processing and compression allows versatile and effective interventions in the signal structures. The order of the two modules is not specified. For example, For example, with the Transient Designer, strongly emphasized transient processes can be precisely compressed, but vice versa, transients can also be highlighted again after compression. Use live and in the studio as a very flexible and versatile, single-channel dynamics tool Link function for stereo editing with two devices Application Comprehensive, corrective and sound-shaping dynamics processing of all instruments and voices The prime discipline for using both modules is the processing of dynamic signals such as percussive instruments, Bass and guitar tracks, piano etc. As a transient designer As a compressor
Attributes
Product Details
|
Properties
Entrances & Exits
Electronically balanced instrumentation amplifiers
Inputs: XLR and 6.3 mm stereo jack (TRS)
Side chain input: 6.3 mm mono jack (TS)
Outputs: XLR and 1/4" stereo jack (TRS)
Stereo Link/Slave: RJ?45, for cable type 568?A
Input impedance: 10 kOhm balanced, 5 kOhm unbalanced, side chain approx. 80 kOhm
Output impedance: 150 ohm balanced, 75 ohm unbalanced.
Nominal input level: +4?dBu/-10?dBV
Maximum input level: 20.5?dBu at +4?dBu, 13.2?dBu at -10?dBV
Max. output level: 21?dBu
Measurements
Frequency range (-3?dB): 10?Hz to >?200?kHz
Common mode rejection: > 60?dB
(at 1 kHz, 0 dBu input level and gain factor 1)
THD Transient Designer: 0.004, Twin Core Compressor: 0.005
(in percent, at 1?kHz, 0?dBu input level and gain factor 1)
External voltage distance (A-weighted)
Transient Designer: -96.4?dB, Compressor: -96.5?dB, Total: 94.6?dB
Dynamic range (unweighted)
Transient Designer: 114.5?dB, Compressor: 114.5?dB, Total: 112.5?dB
filter
Low pass 1: 100?Hz, 18?dB/octave
Low pass 2: 540?Hz,18?dB/octave
Bandpass: 800?Hz-3.1?kHz, 12?dB/octave
Power supply
Toroidal transformer
Fuses: 230V AC, 50 Hz: 315 mA, 120 V AC, 60 Hz: 630 mA
Voltage selector switch: 115V/230V
Power consumption: 19?VA
Measurements and weight
Housing (W x H x D): 482 x 88 x 239?mm
Depth with controls and sockets: 263?mm
Weight: 3.8?kg
Electronically balanced instrumentation amplifiers
Inputs: XLR and 6.3 mm stereo jack (TRS)
Side chain input: 6.3 mm mono jack (TS)
Outputs: XLR and 1/4" stereo jack (TRS)
Stereo Link/Slave: RJ?45, for cable type 568?A
Input impedance: 10 kOhm balanced, 5 kOhm unbalanced, side chain approx. 80 kOhm
Output impedance: 150 ohm balanced, 75 ohm unbalanced.
Nominal input level: +4?dBu/-10?dBV
Maximum input level: 20.5?dBu at +4?dBu, 13.2?dBu at -10?dBV
Max. output level: 21?dBu
Measurements
Frequency range (-3?dB): 10?Hz to >?200?kHz
Common mode rejection: > 60?dB
(at 1 kHz, 0 dBu input level and gain factor 1)
THD Transient Designer: 0.004, Twin Core Compressor: 0.005
(in percent, at 1?kHz, 0?dBu input level and gain factor 1)
External voltage distance (A-weighted)
Transient Designer: -96.4?dB, Compressor: -96.5?dB, Total: 94.6?dB
Dynamic range (unweighted)
Transient Designer: 114.5?dB, Compressor: 114.5?dB, Total: 112.5?dB
filter
Low pass 1: 100?Hz, 18?dB/octave
Low pass 2: 540?Hz,18?dB/octave
Bandpass: 800?Hz-3.1?kHz, 12?dB/octave
Power supply
Toroidal transformer
Fuses: 230V AC, 50 Hz: 315 mA, 120 V AC, 60 Hz: 630 mA
Voltage selector switch: 115V/230V
Power consumption: 19?VA
Measurements and weight
Housing (W x H x D): 482 x 88 x 239?mm
Depth with controls and sockets: 263?mm
Weight: 3.8?kg
Report incorrect data about this product