Neutrik ACRM (Braun)
Acessórios Tomada
EUR 0.28
Incl. VAT. Free delivery in Alemanha from EUR 200
Produto # | 147332 |
Marca | Neutrik |
Categoria | Acessórios Tomada | Categoria | Neutrik - Acessórios |
Série | Neutrik A |
Disponível desde | janeiro 2020 |
Disponiblidade | Brevemente será encomendado |
Portes de envio: EUR 6.00
Características
Detalhes do produto
|
Informação Série
The `State of the Art` receptacle. Round plastic body XLR pcb mount panel connector. These have the smallest size and highest packing density (23mm between centres). New designed tulip type female contact on 3 pin versions and fork type on 4 and 5 pole female connectors with hard gold plating and polished contact areas. Variety of grounding options and termination facilities, UL recognized component.
Termination
V = vertical pcb mount, straight pins
H = horizontal pcb mount, angled pins
HL = lateral left pcb mount
HR = lateral right pcb mount
Y = IDC connection
Locking mechanism
-0 = no latch, retention spring
No suffix = latch lock
Grounding options
Male connector
-0 = ground contact connected to shell ground, but not to front panel and Pin 1
w/o suffix = separate ground contact to mating connector shell and front panel
Female connector
-1 = mating connector shell to pin1 and front panel
-2 = separate ground contact to mating connector shell and front panel
w/o suffix = without ground / shell contact
Rear panel mount
Panel fastening
Self-tapping PLASTITE* screw with thread 2.9x1.06 and of tri-rondular configuration (A-screw)
*PLASTITE is a registered trademark of SFS Unimarket
Panel thickness 1 - 3 mm
Termination
V = vertical pcb mount, straight pins
H = horizontal pcb mount, angled pins
HL = lateral left pcb mount
HR = lateral right pcb mount
Y = IDC connection
Locking mechanism
-0 = no latch, retention spring
No suffix = latch lock
Grounding options
Male connector
-0 = ground contact connected to shell ground, but not to front panel and Pin 1
w/o suffix = separate ground contact to mating connector shell and front panel
Female connector
-1 = mating connector shell to pin1 and front panel
-2 = separate ground contact to mating connector shell and front panel
w/o suffix = without ground / shell contact
Rear panel mount
Panel fastening
Self-tapping PLASTITE* screw with thread 2.9x1.06 and of tri-rondular configuration (A-screw)
*PLASTITE is a registered trademark of SFS Unimarket
Panel thickness 1 - 3 mm
Documentos (1)
Conjunto de Produtos
Este produto faz parte do seguinte set:
Marca
Relatar dados incorretos sobre este produto