Sennheiser IE 40 PRO (clear)
Brand: Sennheiser
Series: Sennheiser IE
Category: In-Ear Monitoring Headphones
Availability:
1 piece in stock| Shop | In stock |
|---|---|
| Vörstetten |
1 piece in stock |
EUR 95.00
Description
The IE 40 PRO features a newly-developed dynamic broadband transducer delivering
distortion-free precision even at extreme volumes, smooth response across the frequency spectrum and a strong bass foundation. The compact 10mm diaphragm permits an ergonomic construction with a secure fit and high level of wearing comfort. The robust design makes the earbuds fit for stage use, even their cable duct.
distortion-free precision even at extreme volumes, smooth response across the frequency spectrum and a strong bass foundation. The compact 10mm diaphragm permits an ergonomic construction with a secure fit and high level of wearing comfort. The robust design makes the earbuds fit for stage use, even their cable duct.
Properties
- One extra-wideband transducer covering the entire frequency range
- Phase linearity - phase differences are non-existent
- Truly distortion free with only < 0,06 % total harmonic distortion
- Free of cross-over effects
- A natural and differentiated signal provides a precise sound image
- True punch - audible in demanding environments
- Able to withstand higher sound pressure levels
- Ultra-lightweight and compact design of the ear mold
- Transducer principle Dynamic (SYS 10)
- Frequency response 20 - 18,000 Hz
- Impedance 20 Ohms
- Sound pressure level (SPL)) 115 dB (1kHz / 1 Vrms)
- Total harmonic distortion (THD) < 0.1 % (1kHz, 94dB)
- Noise attenuation < 26 dB
- Operating temperature -5°C to +50°C
- Storage temperature -20 °C to + 70°C
- Magnetized field strength 3.5 mT
- Relative humidity < 95 %
- Cable length 1,3m 4,3 feet
- Weight (incl. plug, cable) 18g
- Phase linearity - phase differences are non-existent
- Truly distortion free with only < 0,06 % total harmonic distortion
- Free of cross-over effects
- A natural and differentiated signal provides a precise sound image
- True punch - audible in demanding environments
- Able to withstand higher sound pressure levels
- Ultra-lightweight and compact design of the ear mold
- Transducer principle Dynamic (SYS 10)
- Frequency response 20 - 18,000 Hz
- Impedance 20 Ohms
- Sound pressure level (SPL)) 115 dB (1kHz / 1 Vrms)
- Total harmonic distortion (THD) < 0.1 % (1kHz, 94dB)
- Noise attenuation < 26 dB
- Operating temperature -5°C to +50°C
- Storage temperature -20 °C to + 70°C
- Magnetized field strength 3.5 mT
- Relative humidity < 95 %
- Cable length 1,3m 4,3 feet
- Weight (incl. plug, cable) 18g
Reviews (3)
Overall review: 
Operation:
Features:
Sound:
Operation:
Features:
Sound:
3 customers
nobody
nobody
nobody
nobody
Overall review:
Operation:
Features:
Sound:
Operation:
Features:
Sound:
00
Please log in to rate this product review.
Please log in to rate this product review.
Sehr zufrieden
Super Sound, passen sehr gut. Ohrbügel ist besser formbar als die Shure In-Ear.
Overall review:
Operation:
Features:
Sound:
Operation:
Features:
Sound:
00
Please log in to rate this product review.
Please log in to rate this product review.
Top Preis/Leistung
Für diesen Preis super Kopfhörer. Sehr guter Tragekomfort. Würde ich wieder kaufen!
Overall review:
Operation:
Features:
Sound:
Operation:
Features:
Sound:
00
Please log in to rate this product review.
Please log in to rate this product review.
Deutlich besser als Shure
Deutlich bequemerer Sitz als alle anderen Shure SE, angenehmeres und hochwertigeres Kabel (kein stechender Plastikgeruch, so wie bei den transparenten Kabeln von Shure), einfacheres Einsetzen. Aber viel wichtiger: Der Sound ist um Klassen besser als bei Shure (Vergleich war zu SE215, SE425 und SE535). Nach dem Release der IE-Serie von Sennheiser dieses Jahr kann ich nicht verstehen wie man noch die IEMs von Shure kaufen kann. Dazu kommt: Die Austauschkabel von Sennheiser kosten deutlich weniger als bei Shure.
Related products
