AER - Acoustic Guitar Amp

Four individual channels.

80 Watt output.

Two effect processors(Choice of 4 effects per 2 channels).

Channels: 2

Power: 60 Watt

Equipment: 8" (200 mm) twin cone speaker Loudspeaker

Channels: 2

Power: 60 Watt

Equipment: 8" (200 mm) twin cone speaker Loudspeaker

(CCP); Single-channel acoustic amplifier for classical instruments

Input 1: Preamp matrix with 6 presets, selectable via DIP switch = symmetrical mic preamp, 48V phantom power, high-quality line preamp, 9V phantom power

Power: 40 Watt

2 Separately adjustable inputs: 1x Jack and 1x XLR/jack combo

Phantom power

Effects: digital effect processor with 4 presets: 2 x reverb, delay, chorus

Power amp: 2x 100 W / 4 ohms, dynamic control

Speaker system: 2 x 8”

Channels: 2

Power: 60 Watt

Equipment: 8" (200 mm) twin cone speaker Loudspeaker

Channels: 2

Power: 60 Watt

Equipment: 8" (200 mm) twin cone speaker Loudspeaker

Channels: 2

Power: 60 Watt

Equipment: 8" (200 mm) twin cone speaker Loudspeaker

solid oak, mahogany stained, satin finish

Channels: 2

Power: 60 Watt

Equipment: 8" (200 mm) twin cone speaker Loudspeaker

60 watt @ 4ohms, Dynamic Control

1 x 8' Twin-Cone Speaker

Twin Channel Acoustic System

- Power: 200 W / 8 Ohms

- Speaker: 8" 2 -Way Speaker System

- Includes Soft Bag

Lasts 4 hours on a fully-charged battery

2 Independent Channels (guitar, guitar/vocals)

Power Output: 60 Watts (4 Ohms)

(DOM), four-channel acoustic amplifier

Channel 1: high / low end line input stage with signal trimming, Gianregler, Colour-switch: 'mid-cut treble-boost filter, 3-band EQ, effects send

(BPF); Two-channel acoustic amplifier for the low registers

Channel 1: XLR/6.3 mm combination socket, adjustable as a high-quality line input stage or symmetrical microphone input stage with switchable 24V phantom power, 3-band tone control