Login with Facebook
Fischer Amps In Ear Amp 8
In-Ear Monitor Accessory
CHF 409.00
Free delivery in Switzerland
| Product # | 245567 |
| Brand | Fischer Amps |
| Category | In-Ear Monitor Accessories | Brand Category | Fischer Amps - Accessories |
| Release date | September 2023 |
| Availability |  1 unit in stock |
| Shop | Availability |
|---|---|
| Giebenach BL |
1 piece in stock |
This page contains auto-translated text
Description
Fischer Amps Mini Body Packs with XLR input and volume control are used to control the volume directly for the musician [Art. No. 001125]. This system allows short cable runs on stage and cabling with standard microphone cables. The Class A MOSFET power amplifier has a power switch, so that it is possible to work with headphones with high impedances as well as with low-impedance in-ear headphone systems. The XLR inputs have parallel XLR outputs, which allows them to be looped through to the next device. This makes it very easy to provide a stereo mix for a large number of listeners. The optimal system for orchestras, studios, conferences and cool computers.
Attributes
Product Dimensions
| ||||||||||||
Product Details
| ||||||||||||
Dimension
|
Properties
- Two balanced inputs with XLR/jack combination socket
- with loop-through option (XLR outputs)
- LED display of the input signals
- Brand new Class A MOSFET headphone amplifier with limiter function
- Switching in the output stage for power adjustment for low-impedance in-ear headphone systems and headphones with higher impedance greater than 250 ohms
- Robust 9.5’’ housing with integrated switching power supply
- Switchable voltage supply of 115VAC or 250VAC
- Ground lift switch
- 19" installation possible using the included 19" mounting kit
- Weight: 2.000kg
- Height: 190mm
- Width: 220mm
- Depth: 43mm
- with loop-through option (XLR outputs)
- LED display of the input signals
- Brand new Class A MOSFET headphone amplifier with limiter function
- Switching in the output stage for power adjustment for low-impedance in-ear headphone systems and headphones with higher impedance greater than 250 ohms
- Robust 9.5’’ housing with integrated switching power supply
- Switchable voltage supply of 115VAC or 250VAC
- Ground lift switch
- 19" installation possible using the included 19" mounting kit
- Weight: 2.000kg
- Height: 190mm
- Width: 220mm
- Depth: 43mm
Specifications
- Operating voltage: 115V AC / 230V AC 50/60 Hz (switchable)
- Device power: 18 W max.
- Mains connection: Euro mains socket 3-pin with grounding
- Frequency response: 20 Hz to 50 kHz +/- 1 dB
- Headphone ramp power (low level): max. 190 mW,
- Minimum impedance 12 ohms max. 1.2 V RMS, 0.0026% THD at 1 kHz
- Headphone ramp power (high level): max. 400 mW,
- Minimum impedance 40 ohms max. 4V RMS, 0.0025% THD at 1 kHz
- Limiter in the headphone ramp: Yes (fixed, cannot be switched off at an internal level of +4 dB)
- Inputs: 2 x XLR/jack combination, balanced, 0 dB input level
- Outputs: 2 x XLR link out
- Headphone outputs: 8 x XLR male for XLR microphone cable or guitar in ear cable
- Device power: 18 W max.
- Mains connection: Euro mains socket 3-pin with grounding
- Frequency response: 20 Hz to 50 kHz +/- 1 dB
- Headphone ramp power (low level): max. 190 mW,
- Minimum impedance 12 ohms max. 1.2 V RMS, 0.0026% THD at 1 kHz
- Headphone ramp power (high level): max. 400 mW,
- Minimum impedance 40 ohms max. 4V RMS, 0.0025% THD at 1 kHz
- Limiter in the headphone ramp: Yes (fixed, cannot be switched off at an internal level of +4 dB)
- Inputs: 2 x XLR/jack combination, balanced, 0 dB input level
- Outputs: 2 x XLR link out
- Headphone outputs: 8 x XLR male for XLR microphone cable or guitar in ear cable
Report incorrect data about this product
Report incorrect data
Did you see an error regarding this product? Please describe it below and we will review it as soon as possible
