Fischer Amps In Ear Amp 8
In-Ear Monitor Accessory
EUR 429.00
MSRP: EUR 499.00
MSRP: EUR 499.00
Incl. VAT, free shipping in Germany
Product # | 245567 |
Brand | Fischer Amps |
Category | In-Ear Monitor Accessories | Brand Category | Fischer Amps - Accessories |
Release date | September 2023 |
Availability | Will be ordered for you as quick as possible |
Unit: 1 piece(s)
This page contains auto-translated text
Description
Fischer Amps Mini Body Packs with XLR input and volume control are used to control the volume directly for the musician [Art. No. 001125]. This system allows short cable runs on stage and cabling with standard microphone cables. The Class A MOSFET power amplifier has a power switch, so that it is possible to work with headphones with high impedances as well as with low-impedance in-ear headphone systems. The XLR inputs have parallel XLR outputs, which allows them to be looped through to the next device. This makes it very easy to provide a stereo mix for a large number of listeners. The optimal system for orchestras, studios, conferences and cool computers.
Attributes
Product Dimensions
| ||||||||||||
In-Ear Monitor Accessory attributes
| ||||||||||||
Product Details
| ||||||||||||
Dimension
|
Properties
- Two balanced inputs with XLR/jack combination socket
- with loop-through option (XLR outputs)
- LED display of the input signals
- Brand new Class A MOSFET headphone amplifier with limiter function
- Switching in the output stage for power adjustment for low-impedance in-ear headphone systems and headphones with higher impedance greater than 250 ohms
- Robust 9.5’’ housing with integrated switching power supply
- Switchable voltage supply of 115VAC or 250VAC
- Ground lift switch
- 19" installation possible using the included 19" mounting kit
- Weight: 2.000kg
- Height: 190mm
- Width: 220mm
- Depth: 43mm
- with loop-through option (XLR outputs)
- LED display of the input signals
- Brand new Class A MOSFET headphone amplifier with limiter function
- Switching in the output stage for power adjustment for low-impedance in-ear headphone systems and headphones with higher impedance greater than 250 ohms
- Robust 9.5’’ housing with integrated switching power supply
- Switchable voltage supply of 115VAC or 250VAC
- Ground lift switch
- 19" installation possible using the included 19" mounting kit
- Weight: 2.000kg
- Height: 190mm
- Width: 220mm
- Depth: 43mm
Specifications
- Operating voltage: 115V AC / 230V AC 50/60 Hz (switchable)
- Device power: 18 W max.
- Mains connection: Euro mains socket 3-pin with grounding
- Frequency response: 20 Hz to 50 kHz +/- 1 dB
- Headphone ramp power (low level): max. 190 mW,
- Minimum impedance 12 ohms max. 1.2 V RMS, 0.0026% THD at 1 kHz
- Headphone ramp power (high level): max. 400 mW,
- Minimum impedance 40 ohms max. 4V RMS, 0.0025% THD at 1 kHz
- Limiter in the headphone ramp: Yes (fixed, cannot be switched off at an internal level of +4 dB)
- Inputs: 2 x XLR/jack combination, balanced, 0 dB input level
- Outputs: 2 x XLR link out
- Headphone outputs: 8 x XLR male for XLR microphone cable or guitar in ear cable
- Device power: 18 W max.
- Mains connection: Euro mains socket 3-pin with grounding
- Frequency response: 20 Hz to 50 kHz +/- 1 dB
- Headphone ramp power (low level): max. 190 mW,
- Minimum impedance 12 ohms max. 1.2 V RMS, 0.0026% THD at 1 kHz
- Headphone ramp power (high level): max. 400 mW,
- Minimum impedance 40 ohms max. 4V RMS, 0.0025% THD at 1 kHz
- Limiter in the headphone ramp: Yes (fixed, cannot be switched off at an internal level of +4 dB)
- Inputs: 2 x XLR/jack combination, balanced, 0 dB input level
- Outputs: 2 x XLR link out
- Headphone outputs: 8 x XLR male for XLR microphone cable or guitar in ear cable
Report incorrect data about this product