MOTU 828mk3 Hybrid

- Hybrid FireWire/USB2 connectivity - connect to your computer via either FireWire bus-powered or hi-speed USB2. - CueMix FX - flexible 28 input/16 bus mixer with on-board DSP effects, including reverb with sends / returns, plus EQ and compression on every input and output. - 28 inputs / 30 outputs (at 44.1/48 kHz) - there's no channel sharing in the 828mk3; the mic inputs, S / PDIF I / O, headphone out and main outs are all handled as separate channels. - Front-panel control - access any setting in your entire 828mk3 mix directly from the front panel. - Stand-alone operation - program your mixes at the studio and then bring the 828mk3 to your gig - no computer needed. Need to tweak the mix? Do it on site using the back-lit LCD and front-panel controls. - Multiple CueMix FX mixes - for example, create different monitor mixes for the main outs and headphones. Or add send / return loops for outboard gear - with no latency. - Two front panel combo jacks Provide hi-Z 1 / 4 "guitar input or low-Z XLR mic input with phantom power, pad and plenty of gain -. Mic / guitar instrument sends - add your favorite outboard EQ, preamp, reverb or other processor to the two mic / guitar inputs, before the signal goes digital -. Clip protection - Mic / guitar input limiter Prevents digital clipping and distortion from overloaded signal levels up to +12 dB over zero -. Eight 24-bit 192kHz analog inputs and outpus on balanced / unbalanced 1 / 4 "TRS jacks - Precision Digital Trim - Digitally controlled analog trim on all analog inputs (mic / guitar inputs + quarter-inch TRS inputs) provides accurate adjustements in increments of 1 dB fine-tune the balance of. your analog inputs and then save / recall trim configurations. - Flexible optical I / O - 16 channels of ADAT lightpipe, 8 channels of SMUX (96 kHz) or two pairs of stereo TOSLink Mix and match formats between the two banks -.. Sample -accurate MIDI - connect a MIDI controller and / or sound module with no separate interface needed MIDI I / O is sample-accurate with supporting software -.. Foot switch input - connect a standard foot pedal switch (sold separately) for hands-free punch-in and punch-out while recording or map the pedal to any keystroke function in your host software -.. Expandable - add additional interfaces for more I / O as your needs grow -. Separate XLR main outs and front-panel headphone jacks , each with independent volume control -. Stereo 24-bit 96kHz S / PDIF in / out - Word clock in and out - SMPTE in and out - DC-coupled TRS outputs - can be used with Volta (sold separately) to manipulate and sequence voltage-controlled modular synthesizers from a host DAW -. Includes 32 - and 64-bit native drivers for Mac OS X and Windows 7/Vista/XP, including ASIO, WDM, Wave, Core Audio, and Core MIDI support all popular Mac. Audio and Windowsoftware. - 100% compatible with all host-based effects processing in today's popular audio programs. - Includes AudioDesk full-featured sample-accurate workstation software for the Macintosh with recording, editing, mixing, real-time 32-bit effects processing & sample-accurate sync. - Plug-and-play operation with your Mac or PC via FireWire or high-speed USB 2.0. - Front panel volume control for monitoring. Stereo, Quad, 6.1, 7.1 and user-defined surround monitoring setups available. - Two front panel headphone jacks with independent volume controls. - Front panel meters or activity LEDs for all analog, digital and MIDI I / O, plus SMPTE sync tach and lock LEDs. - Dedicated front panel clock status LEDs. - International 100-240V, 50-60 Hz auto switching power supply. - Chassis dimensions, excluding rack ears and front and back panel knobs and connectors: 19 x 7 x 1.75 inches (48.26 x 17.78 x 4.45 cm). Knobs and connectors extend up to 0.5 inch (1.27 cm) from front and back panels, adding 1 inch (2.54 cm) to depth. With rack ears attached, fits standard 19 inch (48.26 cm) rack at 1U high.

- Weight: 3.900kg