Reverend Guitars Billy Corgan (satin pearl white)
MSRP: EUR 1642.20
Product # | 208014 |
Brand | Reverend Guitars |
Category | Alternative Design Guitars | Brand Category | Reverend Guitars - Alternative Design Guitars |
Series | Reverend Guitars Signature Series Reverend Guitars Signature Series Billy Corgan |
Release date | March 2024 |
Availability | Will be ordered for you as quick as possible |
Description
RAILHAMMER CARTRIDGES
Rails under the wound strings for tight bass. Poles under the unwound strings for crisp highs. This revolutionary design from Reverend founder Joe Naylor delivers exceptional clarity and punch.
STRiNG_THROUGH-STEG
String-thru body design and stainless steel saddles for a percussive response that offers maximum sustain and a sounding, solid tone.
LOW-PROFILE ROTARY CONTROL / BASS CONTOUR
All controls have the classic, flat shape and are made of chrome. With the passive bass contour you can tighten the bass range or re-voicen the pickups. Variable pickup voicing by turning the potentiometer
PIN-LOCK TUNER
A thumbwheel under the tuner pushes a steel pin up through the post and locks the string in place for exceptional tuning stability and super-fast string changes.
SIGNED HEADSTOCK
Each Reverend is signed by hand on the back of the headstock by one of our highly qualified technicians who adjust, inspect and test all instruments.
CHAMBERED CORINA BODY
Korina (also known as white limba) is a medium-weight wood that is highly valued for its consistency and tonal properties. It's a key factor in creating our vibrant, responsive, and overtone-rich instruments. The BC-1 has strategic chambers under the pickguard to create even more resonance and reduce weight.
BONEITE SADDLE
We use "Boneite", a synthetic saddle material that is more durable than natural bone. It reduces friction so the strings can slide smoothly through the saddle notches, thus improving tuning stability.
TRIPLE-TREE
This patent-pending string tree has an extended axle to hold three strings at the same time, preventing the G-string from buzzing in the saddle notch
DUAL ACTION COLLAR ROD
Our dual action rod can be adjusted in both directions, which enables backward or forward curvature. This ensures that the correct setting range is possible regardless of the string tension, extreme climatic conditions or the effects of long-term aging. It is also attached to the headstock for easy access.
SIX FIXED SCREWED NECK PLATE
Two additional bolts increase the contact pressure of the neck by fifty percent. This creates a stronger neck joint that improves sustain, tuning stability, and neck alignment
ANGLED NECK HEEL
All Reverend solid body guitars in the Bolt-On series have a flat, angled neck heel. This improves comfort and hand access when reaching high altitude!
SELF-DEVELOPED SOCKET PLATE
Our specially developed socket plate has four instead of two fastening screws. The additional screws prevent the plate from tearing out of the body. The laser-engraved steel logo ensures durability and adds an extra touch of class!
PURE TONE JACK
All Reverends use an improved jack from Pure Tone Technologies. A standard socket has single contacts, but the Pure Tone socket has double contacts for improved grip, a pristine audio signal and absolute reliability. The best guitar jack on the market.
TREBLE BLEED CIRCUIT
All Reverend guitars have a treble bleed circuit that doesn't attenuate the treble when you turn down the volume control. If you turn down a standard volume control, the sound loses treble and sounds dull. Now you can turn yourself down and still sound good!
10% POTS
We use alpha potentiometers with a tolerance of + -10%. While a typical pot has + -20% tolerance, our regulators are built to stricter specifications, which makes them more consistent. Typically used in expensive boutique guitars, but standard on all Reverends.
10% POLY CAPS
We use capacitors with a tolerance of + -10%, where usual capacitors have a tolerance of + -20%. Our capacitors are made to stricter specifications so they are more consistent. Made from polyester, they are also more durable and less sensitive to temperature than cheaper ceramic caps. Typically used in expensive boutique guitars
PLAYED BY
Billy Corgan / The Smashing Pumpkins
Attributes
Alternative Design Guitar attributes
| ||||||||||||||||
Product Details
|
Properties
- pickups: Billy Corgan Bridge, Billy Corgan Neck
- bridge: Hardtail
- neck: roasted Maple, Satin Amber Finish
- scale: 25 1/2"
- neck profile: Medium Oval
- fingerboard: roasted Maple - 12" Radius
- frets: 22 Medium Jumbo
- truss rod: Dual Action - Headstock Access
- tuners: Reverend Pin-Lock
- nut: 43mm Width - Boneite
- controls: Volume, Tone, Bass Contour, 3-Way
- strings: 10-46